Multi-layer sintered wire mesh is a new filter material made by special laminated pressing and vacuum sintering process, with high mechanical strength and overall rigid structure.
The production process of cast iron balls is a complex and intricate process that involves several steps. This process requires both skillful workers and advanced equipment to ensure high-quality products are produced. Grinding casting balls are essential
1. Mould material: S50C, P20H, 718H, 2738, S136 and etc.2. Cavity no.: single3. System of runner: hot runner, cold runner4. Ejection type: ejection pin, air gate, hydro cylinder5. Term of mould production: 50days---60days
Half tooth section high efficiency concrete pdc core drill bits for hard rock.Suitable for limestone, dolomite, due to bit diamond cutting, staggered inside and outside, drilling speed.
The body and keepers of aluminium bolted type tension clamp are malleable iron,cotter-pins are stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.
*The service life is based on Sinova’s R&D Lab data. The actual life is decided by several factors such as operation level, raw material quality, formula composition etc.
Connector is a purely passive electro-mechanical connecting device used to join electrical terminations and create an electrical circuit. Connector enable contact between wires, cables, printed circuit boards and electronic components.
CF flange is a kind of regular vacuum flange, which is used to connect vacuum chambers, tubing and vacuum pumps to each other. CF is the abbreviation for Conflat Flange.
High Flow PL-FB-NLW Series Filter Cartridges are made from depth fine PP or GF non-woven fabrics.The filter has a big diameter of 6.3 inch/160mm and no inner core, single open, the inside to outside flow pattern ensure that all the particles will be inter